Audio-Technica, AT-ART9XI, Dubbel rörlig spole, Special Line slipning av nål

  • 14 990:-

Overview of AT-ART9XIFeaturing a special line contact  stylus on a 0.28 mm diameter solid boron cantilever, the AT-ART9XI  replaces the AT-ART9 a

Overview of AT-ART9XI

Featuring a special line contact  stylus on a 0.28 mm diameter solid boron cantilever, the AT-ART9XI  replaces the AT-ART9 as Audio-Technica’s flagship magnetic core MC  cartridge.                                                                       

The “ART” in the model number  stands for Audio-Technica Reference Transducer, a designation that we  give only to our flagship phono cartridges. The specially designed  magnetic circuit boasts an output voltage of 0.5 mV (1 kHz, 5 cm/sec),  making the cartridge easy to use and capable of reproducing even the  most delicate expressions, while also ensuring dynamic playback. The  dual moving coils (fashioned from high-performance PCOCC wire) are  aligned in an inverted V shape to provide high separation and wide  response for clear sound localization and minimal distortion. Threaded  cartridge mounting holes make installation to a headshell or integrated  tonearm incredibly easy.

  • Audio-Technica’s flagship magnetic core moving coil cartridge
  • Dual moving coils are aligned in an inverted V shape, providing high  separation and wide response for clear sound localization and minimal  distortion
  • Special line contact stylus ensures faithful reproduction of the  music signal, and the 0.28 mm diameter solid boron cantilever provides  excellent response characteristics
  • Neodymium magnet and permendur yoke significantly increase magnetic energy
  • Specially designed magnetic circuit provides an output voltage of 0.5 mV (1 kHz, 5 cm/sec)
  • PCOCC coils ensure high-fidelity transmission
  • Machined aluminum base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability
  • Hybrid body of machined aluminum and high-rigidity plastic reduces undesirable parasitic resonance
  • Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm
Cartridge & Stylus
Frequency Response
20-50,000 Hz
Channel Separation
30 (dB at 1 kHz)
Vertical Tracking Angle
20°
Vertical Tracking Force
1.6-2.0 g (1.8 g standard)
Stylus Construction
Nude
Recommended Load Impedance
Min. 100 ohms (when head amplifier connected)
Coil Impedance
12 ohms (1 kHz)
DC Resistance
12 ohms
Coil Inductance
25 µH (1 kHz)
Output Voltage
0.5 mV (1 kHz, 5 cm/sec.)
Output Channel Balance
0.5 dB (1 kHz)
Stylus Shape
Special line contact
Cantilever
0.28 mm diameter solid boron
Static Compliance
25 x 10-6 cm/dyne
Dynamic Compliance
15 x 10-6 cm/dyne (100 Hz)
Mounting
Half-inch
Cartridge Weight
8.5 g (0.30 oz)
Dimensions
17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.0 mm (0.98") D
Accessories Included
Non-magnetic  screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm ×  2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush
Threaded Hole
M2.6 x 2
Notes
Note: moving  coil cartridges require receivers or preamps with compatible inputs;  their stylus assemblies are not field-replaceable.