Fri frakt över 500:-

ADAM SUB12 - Aktiv Subwoofer 200 W / 1x12"

  • 13 999:-

The Sub12 is a powerful subwoofer designed to extend the low  frequency capabilities of any near or midfield monitoring system down to  22Hz.A sturdy

Dela

The Sub12 is a powerful subwoofer designed to extend the low  frequency capabilities of any near or midfield monitoring system down to  22Hz.

A sturdy special woofer with extended cone travel and a heavy-duty  coil have been optimized for accurate reproduction from a bass reflex  enclosure. The down-firing bass reflex tube avoids intrusive ventilation  noise because of its generous size and shape. The PWM amplifier  produces over 90% efficiency and can handle critical passages without  overheating for long periods of time. An additional output allows you to  cascade as many subwoofers as needed.

The Sub12 subwoofer provides a precise combination of low cutoff  frequency (-3dB at 22Hz) and an undistorted high sound pressure level  (115dB SPL at 1m).

 ADAM Audio subwoofers are designed with one primary goal in mind:  Achieving absolute accuracy and an authentic natural sound in the  process of music reproduction. This means combining exceptional bass  power with precision and clarity in every subwoofer. These elements are  the perfect partners to complement the highly acclaimed clarity and  transparency of ADAM monitors in the lower and lowest frequencies.

All subwoofers feature both balanced (XLR) and unbalanced (RCA)  input/output connectors and comprehensive control options that allow for  adapting to different room acoustics and requirements.

Panel / Controls

All subwoofers feature a level control (-60dB to +6dB), phase switch  (180°) and a variable upper frequency control (50-150Hz). For the  satellite outputs, an 85Hz high pass filter can be switched in to block  frequencies below 85Hz so satellite speakers can meet the Dolby®  recommendations for theater sound and also to relieve the satellites  from the lower frequencies. In addition, you can either switch on/off  the subwoofer manually or use the option of automatically powering up  the subwoofer whenever it receives a signal (‚signal-on/ continuous').