Tascam CD-200 CD player MP3/WAV pitch control IR remote control

  • 2 795:-

The CD-200 offers a simple, cost-effective solution to installations or PA rental where the extra features of a more complex CD player might go unused. Yet

The CD-200 offers a simple, cost-effective solution to installations or PA rental where the extra features of a more complex CD player might go unused. Yet it provides features such as pitch control with an on/off knob, a headphone output with level control, intro check, anti-shock memory, and a variety of convenient playback modes which can help prevent the user from making a mistake. The CD-200 can also play back MP3 and WAV files from data CDs and display ID3 tags and CD-Text. The included wireless remote control gives access to most features and allows a track to be selected directly via a 10-key pad.

Tascam CD-200: Simple, convenient and reliable!

Features at a glance

  • Easy-to-use, affordable CD player
  • High-quality TEAC drive (supports CD-R and CD-RW)
  • Audio CD playback
  • MP3 and WAV file playback from CD
  • Folder selection for MP3 and WAV CDs
  • Continuous, Random and Program playback modes
  • Repeat playback (Single, All, Folder)
  • Intro Check feature
  • CD text and ID3 tag support to display artist and track information if available
  • Time display (CD-DA: Elapsed, Remain, Total Remain; MP3: Elapsed)
  • ±12.5 % pitch control
  • Anti-shock memory (10 seconds)
  • Headphones output with level control
  • Analogue output (RCA)
  • SPDIF digital outputs (coaxial and optical)
  • Wireless remote control included
  • 19-inch rack-mount chassis (2U)

Specifications

General

Compatible discs
CD-R/CD-RW (12-cm/8-cm)
Formats
CD-DA, CD-ROM (ISO 9660 Level 1, 2, 3 JOLIET Romeo UDF 1.5), MP3, WAV
MP3 playback specifications

Audio Mode
Stereo/Joint Stereo/Dual Channel/Mono/VBR
MPEG1 Audio Layer III (MP3)
Sampling frequency
32 kHz/44.1 kHz/48 kHz
Bit rate
32–320 Kbit/s
WAV playback specifications

Sampling frequency
8 kHz/11.025 kHz/12 kHz/16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz
Quantization bit rate
8-bit/16-bit
CD-DA playback specifications

Sampling frequency
44.1 kHz
Quantization bit rate
16-bit
Number of channels
2 (Stereo)
Audio performance

Frequency response
20 Hz - 20 kHz ±1.5 dB
Signal-to-Noise Ratio (S/N)
> 90 dBA (20 kHz LPF)
Distortion (THD+N)
< 0.01% (1 kHz: 20 kHz LPF)
Dynamic range
90 dB min.
Channel separation
90 dB min. (1 kHz, 1 kHz BPF)
Audio outputs

Analogue output unbalanced
RCA pin jacks
Nominal output level
–10 dBV
Maximum output level
+6 dBV
Output impedance
200 Ω
Headphones output
Standard stereo jack
Nominal output power
20 mW + 20 mW min.
(When monitoring CD, THD+N: 0.1% max., 32 Ω load)
Coaxial digital output
RCA pin jack
Compatible signal format
IEC-60958-3 (SPDIF)
Output impedance
75 Ω
Optical digital output
Fibreoptic connector
Compatible signal format
IEC-60958-3 (SPDIF)
Power supply and other specifications

Power requirements
AC 120 V, 60 Hz (USA/Canada)
AC 230 V, 50 Hz (UK/Europe)
AC 240 V, 50 Hz (Australia)
Power consumption
12 W
Operating temperature range
+5 °C to +35 °C
Inclination of installation
5 degrees or less
Dimensions (W x H x D)
481 mm x 95 mm x 298 mm
Weight
4.2 kg