Audio-Technica ATW-11/P - AT-One Beltpack System med ATR35CW

  • 2 329:-

ATW-11/P AT-One Beltpack System with ATR35cW. 2 x 4 channel frequency  plan for enhanced flexibility, Rack mountable for easy installation,  Intuitive

ATW-11/P AT-One Beltpack System with ATR35cW. 2 x 4 channel frequency  plan for enhanced flexibility, Rack mountable for easy installation,  Intuitive receiver and transmitter controls. ATR35cW omnidirectional  condenser lavalier microphone and Up to 10 hour battery life with 2 x  1.5V AA batteries.

ATw-11/P THE AT-ONE ENTRY LEVEL UHF SYSTEM, THE BEST EQUIPPED ON THE MARKET

AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4  channel frequency plan for enhanced flexibility, sturdy but stylish  build quality and a simple user interface, AT-One is ready to become  your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped  with a practical carrying case, rack-mount kit and detachable antennae,  AT-One is the perfect balance of price and performance, ideal for those  looking for accurate, reliable performance at an entry level price. The  AT-One’s frequency plan is divided into two groups with 4 available  channels in each group split between the Europe wide license free  frequency range and the LTE duplex gap. Users can choose up to 4  channels within one group.

Available in three configurations, AT-One can be purchased with a  beltpack or handheld transmitter. The ATW-11/P comes equipped with the  ATR35cW tie-clip microphone.

  • Designed for quick and easy use
  • Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4  channels available in each group, one in the range of authorized  European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-11 system is equipped with a discreet and robust pocket transmitter
  • RF Transmitting power 10mW
  • Comes with an ATR35cW miniature omnidirectional condenser microphone
  • Up to 10 hours' battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

“2 X 4 Channels”

AT-One's frequency plan is divided into two groups, each with 4  channels available, one in the range of authorized European frequencies  and the other in the duplex gap. Users can choose up to 4 channels in a  group.

“rf light indicator”

The display on the half-rack receiver clearly indicates both the RF and AF levels.

“12v power”

The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering  an ATW-B80 booster antenna, active splitters, an antenna combiner or any  other active component.

delivered in a case

The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket  transmitter, detachable antennas, a rack-mount kit, and a power supply,  all in a hard carrying case.

easy to use

The AT-One has been conceived and designed for quick and easy use.  Simply open the carrying case, connect, and your UHF wireless system is  immediately operational.

Micro-omni lavalier mic

The AT-One AT-11/P system comes with an ATR35cW omnidirectional  lavalier microphone, to provide precise and intelligible speech quality.

removable Antennae

The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

Specifications:

Receiver
Body Pack
Overall System
Operating FrequenciesF-Band: 824 - 831 MHz, 863 - 865 MHz
Modulation ModeFM
Frequency Response60 Hz - 16 kHz
Frequency Stability+/- 0.005%, Phase lock loop frequency control
Operating Range60m, typical
Number Of Channels2 x 4 frequencies
RF Power Output10 mW
Battery Life10 hours - depending on battery type and use pattern
Battery TypeTwo 1.5V AA alkaline (not included)
Dimensions66 mm x 98 mm x 22 mm (W x H x D)
Input ConnectionsPin 1: GND
Pin 2: INST
Pin 3: Mic
Pin 4: DC Bias +10V
Spurious EmissionsFollowing national regulations
Receiving SystemAntenna switching diversity
Image Rejection55dB minimum
Sensitivity10dBµV (S/N 60dB @ 20 kHz deviation)
Maximum Output LevelMic / Line (0 / -20dB)
Antenna InputBNC type, 50 - BIAS voltage 12V DC 100mA each
Dimensions200 mm x 42 mm x 122 mm (W x H x D)
Weight418 g without accessories
Accessories IncludedAC Adapter, Antennas, Rack mount adapter, protective carrying case
Audio Output Balanced4dBV
Audio Output Unbalanced-2dBV
Dynamic RangeHH: 108 dB, BP 103 dB (@ max deviation)
Output Connectors (Instrument)Unbalanced: 6.3 mm mono jack
Output Connectors (Microphone)Balanced: XLRM-type
Total Harmonic Distortion<1% - 20 kHz deviation @ 1 kHz