Audio-Technica ATW-13 - AT-One HandHeld System

  • 2 545:-

ATW-13 AT-One Handheld Transmitter System                        ATW-13 AT-One Handheld  Transm

ATW-13 AT-One Handheld Transmitter System                        
ATW-13 AT-One Handheld  Transmitter System - Simple to set up and use, 2 x 4 channel frequency  plan for enhanced flexibility, Rack mountable for easy installation and  Intuitive receiver and transmitter controls.
ATw-13
the AT-ONE eNTRY LEVEL UHF SYSTEM, THE BEST EQUIPPED ON THE MARKET
AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4  channel frequency plan for enhanced flexibility, sturdy but stylish  build quality and a simple user interface, AT-One is ready to become  your perfect wireless companion.
AT-One is designed with simplicity and ease-of-use in mind. Equipped  with a practical carrying case, rack-mount kit and detachable antennae,  AT-One is the perfect balance of price and performance, ideal for those  looking for accurate, reliable performance at an entry level price. The  AT-One’s frequency plan is divided into two groups with 4 available  channels in each group split between the Europe wide license free  frequency range and the LTE duplex gap. Users can choose up to 4  channels within one group.
Available in three configurations, AT-One can be purchased with a  beltpack or handheld transmitter. The ATW-13 handheld system features  the ATW-T3 cardioid condenser handheld transmitter, again with 10mW RF  output and 10 hour battery life.

  • Designed for quick and easy use
  • Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4  channels available in each group, one in the range of authorized  European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-13 system is equipped with a cardioid condenser handheld transmitter
  • RF transmission power 10mW
  • Up to 10 hours' battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

“2 X 4 Channels”
AT-One's frequency plan is divided into two groups, each with 4  channels available, one in the range of authorized European frequencies  and the other in the duplex gap. Users can choose up to 4 channels in a  group.
“rf light indicator”
The display on the half-rack receiver clearly indicates both the RF and AF levels.
“12v power”
The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering  an ATW-B80 booster antenna, active splitters, an antenna combiner or any  other active component.
delivered in a case
The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket  transmitter, detachable antennas, a rack-mount kit, and a power supply,  all in a hard carrying case.
easy to use
The AT-One has been conceived and designed for quick and easy use.  Simply open the carrying case, connect, and your UHF wireless system is  immediately operational.
cardioid condenser mic
The ATW-T3 cardioid condenser handheld microphone is included. This  microphone prevents interference when used in places equipped with  induction loops.
removable antennae
The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.
Specifications:

Receiver
Handheld Transmitter
Overall System
Operating Frequencies
F-Band: 824 - 831 MHz, 863 - 865 MHz
Modulation Mode
FM
Frequency Response
60 Hz - 16 kHz
Frequency Stability
+/- 0.005%, Phase lock loop frequency control
Operating Range
60m, typical
Number Of Channels
2 x 4 frequencies
RF Power Output
10 mW
Spurious Emissions
Following national regulatios
Microphone Element
Condenser Cardioid
Battery Type
Two 1.5V AA alkaline
Battery Life
10 hours - depending on battery type and use pattern
Dimensions
268 mm long - 52 mm (diameter)
Accessories Included
Stand clamp
Receiving System
Antenna switching diversity
Image Rejection
55dB minimum
Sensitivity
10dBµV (S/N 60dB @ 20 kHz deviation)
Maximum Output Level
Mic / Line (0 / -20dB)
Antenna Input
BNC type, 50 - BIAS voltage 12V DC 100mA each
Dimensions
200 mm x 42 mm x 122 mm (W x H x D)
Weight
418 g without accessories
Accessories Included
AC Adapter, Antennas, Rack mount adapter, protective carrying case
Audio Output Balanced
4dBV
Audio Output Unbalanced
-2dBV
Dynamic Range
HH: 108 dB, BP 103 dB (@ max deviation)
Output Connectors (Instrument)
Unbalanced: 6.3 mm mono jack
Output Connectors (Microphone)
Balanced: XLRM-type
Total Harmonic Distortion
<1% - 20 kHz deviation @ 1 kHz